WAVESHARE 5 inch Touch Screen Expansion for Raspberry Pi CM4, PoE Header, Gigabit Ethernet, 4K Output

  • I am a Raspberry Pi CM4 kit with a 5 inch touch screen all-in-one machine. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users.
  • Notes:
  • 1. Do not plug and unplug any device except USB and HDMI while the baseboard is working.
  • 2. If the fan needs to be replaced, please confirm the fan voltage and then power on.
  • 3. The USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.
was $186.20 Special Price $153.70
In stock
SKU
06-DIY0283
Features
  • I am a Raspberry Pi CM4 kit with a 5 inch touch screen all-in-one machine. The PoE pin Gigabit Ethernet port supports 4K output, onboard four-way USB2.0, 5-inch touch screen, etc. The all-in-one kit is convenient for users.
  • Notes:
  • 1. Do not plug and unplug any device except USB and HDMI while the baseboard is working.
  • 2. If the fan needs to be replaced, please confirm the fan voltage and then power on.
  • 3. The USB SLAVE interface is used to burn the image and cannot be used as an OTG interface.
  • 4. In normal use, it is necessary to provide at least 5V 2.5A power supply for CM4. Otherwise, there may be problems such as automatic shutdown, frequency reduction and so on.
  • 5. Onboard default 4-way USB 2.0 interface.
  • 6. Support POE pins, additional POE HAT is required if POE function is required.
  • 7. This screen needs to add a driver to work.
  • Specifications
  • 1. CM4 Socket: Suitable for all variants of Compute Module 4
  • 2. Networking:
  • - Gigabit Ethernet RJ45 connector
  • - M.2 M KEY, supports NVME SSD
  • 3. POE: PoE header (additional PoE HAT is required to enable PoE feature)
  • 4. USB: USB 2.0 x 4
  • 5. Display: 5 inch screen, 800 x 480 pixels, 5-point capacitive touch
  • 6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector)
  • 7. Video: HDMI, supports 4K 30fps output
  • 8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4
  • 9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
  • 10. Fan header: Allows speed adjustment and measurement, 5V / 12V
  • 11. Power input: 5V
  • 12. Size: 127.7 x 87.45mm
Packing List
  • WAVESHARE 5 inch Touch Screen Expansion for Raspberry Pi CM4, PoE Header, Gigabit Ethernet, 4K Output
  • Original set and packaging
Write Your Own Review
You're reviewing:WAVESHARE 5 inch Touch Screen Expansion for Raspberry Pi CM4, PoE Header, Gigabit Ethernet, 4K Output