MCU controlled Interface for Carsoft 6.5 which is compatible with the original interface. Fully digital line switching and MCU controlled service reset timing
Digital total test: It gives you a complete idea of the overall condition of the car
Digital single test: It gives you detailed information about the appropriate control unit. Stored errors will be shown in a written report. This report has a short info-text which help you to eliminate the error.
Special functions for some models: Including service interval reset, component activation, live data, LCM reading, sync. EWS and ECU, adaptation values, and coding.
It can be installed with a quick programming adapter plate, which is convenient for the user to connect to the ECU s quick programming interface, and realize the ECU brush writing programming quickly and stably. It can be perfectly matched with mainstream devices such as KESS and KTAG.
Can be widely used in car ECU brush write data, tool modification upgrade programming, car key read and write programming, remote control programming, VVDl programming and other test functions.
It works for fgtech and bdm100 programmer . K-tag ktag ECU chip tool ,kess v2 ECU tool ktm100
It is the best electrical tester for reducing diagnostic time in automotive electrical systems.
Its long cable makes your testing easily.
After a simple hook-up of the unit to the battery of vehicle, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward.
It has short-circuit protection and can test for bad ground contacts instantly.
Truck AdBlue Emulator Box by passes good working electronic module of the Adblue system on vehicle.
It is very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly. It will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.
Function:
Support Trucks, Buses and Other Heavy Vehicles with EURO 4 and 5 Exhaust Emission Rates
It is a universal adblue emulator, auto heavy duty truck diagnostic interface.
The OpenPort 2.0 combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer for Subaru and for Mitsubishi vehicles, and support for other cars is in progress.
Tactrix Openport 2.0 can works for Toyota, for Jaguar and for LandRover diagnose. The OEM software we have test in for TOYOTA, for LOANDROVER and for JAGUAR. All work excellent.
Tactrix Openport 2.0+ECUFLASH Specifications
(1). 72Mhz 32-bit processor
(2). USB 2.0 full speed device (USB-A/Mini cable included)
It is used for activated style lead-acid storage battery, along with checking battery life time and the following conditions of the battery, starting up, charging, and electrical loading.
The larger the CCA value of the battery , the internal resistance is generally smaller.
The standard voltage is 9.6V. The test result is more than 9.6V???the boot system is normal. (Otherwise???the boot system is abnormal.)
If the voltage reading is less than 12.8V (For 24V system , the reading is less than 25.60V). Please check whether the generator belt is worn and the wire is short-circuited or not.
If the voltage reading more than 15.0V (for 24V system , reading more than 30.00V), please check the regulator
Storage battery testers are used for activated style leadacid storage battery
Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data, which availably by 4-wire Kelvin test connection.
Besides it strengthens input protection inside , in order to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.
This tester is the best tool for battery sales, vehicle repair and condition check of all kinds of lead-acid batteries that used in equipment system associated with lead-acid battery.
OPCOM 2014V diagnostic tool for Opel cars covers almost all Models for Opel cars, even new cars with CAN-BUS based diagnostic. Such as diagnostic function for Vectra-C, for Astra-H, for Zafira-B etc. It lets you read and clear fault codes, support many control units. Opcom OP-Com 2014 V Can OBD2 for Opel Firmware V1.99 with PIC18F458 Chip.
Attention for Latest Opcom Software VAUX-COM_120309a.exe:
If you run it on XP or Win7, please make sure you install dotnetfx35_SP1 system patch, or Opcom software can''''t perform well
When you install on Win7 and open software, please choose Run as administrator, and read the installation video on CD carefully
Feature:
OPCOM is a special PC Based diagnostic interface especially for OPEL.