Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Wires
DC 12V 40A H11 Bulb Strengthen Line Group HID Xenon Controller Cable Relay Wiring
- The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights.
- Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights.
- Connect the red + battery + fuse cable; connect the black cable of the relay to the battery.
- Connect the relay bar lights cable(red / black correspond to bar wire lights).
- Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch.
- Turn on / off switch button to test the bar lights.
- Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.
$6.36 $7.70
DC 12V 40A H7 Bulb Strengthen Line Group HID Xenon Controller Cable Relay Wiring
- The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights.
- Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights.
- Connect the red + battery + fuse cable; connect the black cable of the relay to the battery.
- Connect the relay bar lights cable(red / black correspond to bar wire lights).
- Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch.
- Turn on / off switch button to test the bar lights.
- Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.
$6.45 $7.42
DC 12V 40A H4 Bulb Strengthen Line Group HID Xenon Controller Cable Relay Wiring
- The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights.
- Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights.
- Connect the red + battery + fuse cable; connect the black cable of the relay to the battery.
- Connect the relay bar lights cable(red / black correspond to bar wire lights).
- Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch.
- Turn on / off switch button to test the bar lights.
- Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.
$9.02 $10.73
DC 12V 40A H3 Bulb Strengthen Line Group HID Xenon Controller Cable Relay Wiring
- The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights.
- Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights.
- Connect the red + battery + fuse cable; connect the black cable of the relay to the battery.
- Connect the relay bar lights cable(red / black correspond to bar wire lights).
- Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch.
- Turn on / off switch button to test the bar lights.
- Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.
$9.02 $10.73
DC 12V 40A H1 Bulb Strengthen Line Group HID Xenon Controller Cable Relay Wiring
- The wiring harness of the water resistant switch a two drag with loudspeaker group line connector, each group can control two line lights.
- Between the switch and the control line with self-locking terminals connected to the terminal with a jacket, to prevent short circuits. At the same time, this terminal can be directly in the original position control of the lights, so that you can use the original car switch to control the new lights.
- Connect the red + battery + fuse cable; connect the black cable of the relay to the battery.
- Connect the relay bar lights cable(red / black correspond to bar wire lights).
- Connect the black-switch cable to the battery or system from any place in your car to get the power to the switch.
- Turn on / off switch button to test the bar lights.
- Prohibit the lamp connected directly, because the car comes with the power of the lamp is relatively small, the original line can only withstand a smaller source, if it is forced to rise, will make the circuit burned or accelerated aging line.
$6.84 $8.41
2 PCS DC 12V Universal H4 Bulb Harness Wiring Relay for HID Xenon Light System
- Copper wire, HID xenon light system relay harness for Hi/Lo. Make your car the brightest lamp. Super power boost.
- This auto flashlight booster is special for the car H4 bulb.
- This relay wiring harness offers you crossover and road functionality packed with its easy plug-and-play configuration.
- After installing this headlight booster, it will bulb car will be brighter than 50% than before.
- Easy to install, no modification is needed, it is a long duration and a lighter output. Plug & play.
- Excellent heat corrosion resistance copper cables.
$8.18 $9.73
2 PCS Universal D3 HID Xenon Bulb Converter Cable Adapter D3 Adapter HID Socket Plug Adapter Bulb Wire Connector Wire for Ballast Hid
- Material Made of good plastic and metal material, durable, and have a long service time.
- Function: Connect bulb D3 ballast.
- Length: about 34 cm.
- Package: 2 PCS D3 adpter cables only.
- More convenient to install and use, can be used for replacing the old and broken one.
$7.65 $8.95
2 PCS Universal D2/D4 HID Xenon Bulb Converter Cable Adapter D2/D4 Adapter HID Socket Plug Adapter Bulb Wire Connector Wire for Ballast Hid
- Function: Connect bulb D2/D4 ballast.
- Length: about 21 cm.
- Package: 2 PCS D2/D4 adpter cables only.
$6.54 $7.85
2 PCS Universal D1 HID Xenon Bulb Converter Cable Adapter D1 Adapter HID Socket Plug Adapter Bulb Wire Connector Wire for Ballast Hid
- Function: Connect bulb D1 ballast.
- Length: about 23.5 cm.
- Package: 2 PCS D1 adpter cables only.
$9.17 $11.00
2 PCS H11 Car HID Xenon Headlight Male to Female Conversion Cable
- Good insulation and heat resistance
- Low power consumption, high energy saving and high quality
- Pre-Wired for plug and play
- No need to modify the stock wires at all
- High efficient copper wiring
$6.30 $7.62
2 PCS H7 Car HID Xenon Headlight Male to Female Conversion Cable
- Good insulation and heat resistance
- Low power consumption, high energy saving and high quality
- Pre-Wired for plug and play
- No need to modify the stock wires at all
- High efficient copper wiring
$5.93 $6.88
2 PCS H4 Car HID Xenon Headlight Male to Female Conversion Cable
- Good insulation and heat resistance
- Low power consumption, high energy saving and high quality
- Pre-Wired for plug and play
- No need to modify the stock wires at all
- High efficient copper wiring
$5.56 $6.89
NEED HELP?
Payment options
