Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Repair & Diagnostic Tools
2pcs/Set DUOYI DY523 Automotive Vacuum Pressure Gauge Liquid Charge Fluorine Repair Electronic Refrigerant Meter
- Suitable for various maintenance scenarios and intelligent diagnosis of system faults
- Dual pressure test, real-time display of vacuum and pressure values
- Metal access port is made of durable, corrosion-resistant metal material that meets interface standards
- Easy to operate, direct readout of data
- Folding hook for space-saving and easy access
- Ball-type brass valve design, good sealing performance
- Pressure access port made of metal, more durable
- Pressure test: Psig
$62.75 $76.55
FOXSUR 12V/24V Automotive Lead-acid Battery Internal Resistance Rapid Analyzer (Yellow)
- Material: ABS plastic
- Display: 2.7-inch LCD screen
- Main function: car battery testing
- Scope of use: All vehicle lead-acid starting batteries, including ordinary flooded batteries, EFB batteries, 5. AGM flat batteries, AGM winding batteries, GEL batteries, WET batteries, etc.
- Test range: 3AH - 200Ah
- Test results: SOH, SOC, CCA value, IR, etc.
- Test standards: SAE, DIN, IEC, EN, CA, JIS
- Voltage measurement range: 8-30VDC
$23.20 $27.38
OBDResource High-Pressure Adjustable Dual-Hole Spark Plug Ignition Detector (EU Plug)
- Specifications: EU/US plug (optional)
- Power supply: 100-240V
- Speed: 0-6000 rpm
- It can be used to safely and quickly test spark plug performance
- ST100 can simulate the working conditions of actual engines, and has the advantages of simple structure, easy use, large output energy, and durability.
- Easy to operate, equipped with convenient power cord and plug to use
- Just put the spark plug into the product hole and press the switch to test
- Easy to use, non-professionals can easily master the operation steps
$16.94 $20.84
CNBJ-620 Automobile Injector Tester
- About The Protuct
- This instrument can help you diagnose injector problems, and can test the fuel injectors one by one to help confirm the stuck, leaking or combustion finished condition. It has four kinds of pulse signal output mode, users can choose any one according to their needs. Using 12V automobile battery as the power supply, the continuous working mode can identify the quality of the fuel injector when the engine is off, and the mode locking function ensures the consistency when testing the fuel injector. This instrument can be used with any fuel pressure tester
- Operating Instructions
- Tumn off the engine of the car.
- Remove the wire plug with the fuel injector to be tested, and then connect the two pulse output terminals of the instrument with the fuel injector of the vehicle.
- Connect the red clip of the instrument to the positive pole of 12V automobile battery, and connect the black clip of the instrument to the negative pole of the battery.
- Press "Mode set" key to select the required pulse signal output mode, and the screen will display the currently selected mode. The different models are explained as follows:
- Mode "1": single pulse mode. In this mode, when the "Pulse" key is pressed, the instrument will send out a pulse with a pulse width of about 255 Ms.
$16.50 $20.13
CNBJ-501 100M-1GHz Infrared Frequency Tester
- Instructions
- This product is a test wireless remote control frequency instrument, it can test the frequency of the remote control, can be clearly displayed;And can test the infrared induction is good or bad, lt is convenient for you to adjust the frequency you need when preparing the remote control.
- "ON/OFF" is the power key for external frequency line test. The remote control that needs tobe tested will be emited close to this frequency meter(Placed in the test area), press the remotecontrol to open, you can test the frequency of the remote control, clearly displayed Frequencyvalue. (The effective test range is no more than 5CM. The closer the test area is, the moreaccurate the measured value will be;Car key frequency is generally divided into 320M HZ.434M HZ;868M HZ;)
- "Lighting" is the key to turn on the front lighting; The front of the instrument is equipped withLED lighting, which is more convenient in bad light Place in use;
- "INPUT" is an infrared input indicator. Will need to test the remote control with infrared light byclicking on it The red light shows that the infrared output of the remote control is normally emitted.lf the indicator is off. the Remote control infrared emitter failure, damage and other reasons;
- "IR" is infrared receiving lamp;
- Matters Need Attention
- When testing, some electronic signal interference sources should be avoidedsuch as: signal towers, base stations, telephone poles, sending and receivingText messages, etc.
$16.20 $19.76
JDiag Mini Circuit Tester AC/DC Detection Multi-function Oscilloscope (P50 Pro)
- DC detection: 0.1-45VAC
- Working current: 40mA
- Battery capacity: 200mA
- Battery life: about 4-5 hours
- Frequency bandwidth: 10Hz-200KHz
- Test lamp power: 12V/24V power 5W
- Can quickly detect various communication line signals, sensor signals, as well as various test lamp tests and voltage measurements
- Small size, high precision, supports AC/DC signal mode, frequency range 10Hz-200KHz, easily detects and repairs vehicle sensor faults
$36.82 $42.34
JDiag 6-30V Voltage Detector Automotive Power Circuit Diagnostic Diode (P60)
- Material: ABS
- Supply: DC6-30V
- Measuring range: 0.3V-70V
- Working current: 80mA
- Activation current: 0-8A
- Cable length: 4 meters
- Automotive electrical circuit tester, component activation, detection, diode detection, continuity test, ground detection, tracking and locating short circuit, positive and negative pole detection
- The cord has good tensile strength and comes with alligator clips
$27.77 $32.21
Car V96 ECU Repair Emulator
- Supports IMMO/Seat occupancy sensor/Tacho /ESL Programs.
- This tool is used with ECUs, so check the ECU to make sure it supports before purchase this car emulator.
- Voltage: 9-36V
- Material: ABS
- Temperature: -20-60 degree Celsius
$9.65 $11.87
0-60mm Stainless Steel Tire Tread Vernier Depth Gauge
- Material: stainless steel
- Easy to carry, wear-resistant and shockproof
- The laser marking is clearly calibrated, making it easy to read the numbers clearly
- Metal detection probe, easy to measure and durable to use
- Weight: 0-30mm 25g; 0-50mm 19g; 0-60mm 32g
- Size: 0-30mm 48x70mm; 0-50mm 90x54mm; 0-60mm 100x48mm
$6.21 $7.45
0-50mm Stainless Steel Tire Tread Vernier Depth Gauge
- Material: stainless steel
- Easy to carry, wear-resistant and shockproof
- The laser marking is clearly calibrated, making it easy to read the numbers clearly
- Metal detection probe, easy to measure and durable to use
- Weight: 0-30mm 25g; 0-50mm 19g; 0-60mm 32g
- Size: 0-30mm 48x70mm; 0-50mm 90x54mm; 0-60mm 100x48mm
$6.51 $7.94
0-30mm Stainless Steel Tire Tread Vernier Depth Gauge
- Material: stainless steel
- Easy to carry, wear-resistant and shockproof
- The laser marking is clearly calibrated, making it easy to read the numbers clearly
- Metal detection probe, easy to measure and durable to use
- Weight: 0-30mm 25g; 0-50mm 19g; 0-60mm 32g
- Size: 0-30mm 48x70mm; 0-50mm 90x54mm; 0-60mm 100x48mm
$7.27 $9.01
OTC300 Car Oil Tester Lubricating Oil Quality Analyzer
- This device provides a reference for determining whether the brake fluid can still be used or needs to be replaced.
- Mainly used to detect the quality of brake fluid to ensure sensitive braking and driving safety.
- Test type: turbine oil
- Material: ABS
- With lanyard, easy to carry.
$26.61 $32.20
NEED HELP?
Payment options
