This brake clutch oil change tool is good at exchanging brake clutch fluid, power steering oil, engine oil and any other fluid.
Pour the new brake oil into the master cylinder, connect the black cone nipple to the brake bleeder valve, connect the compressor to the 1/4 inch air quick plug. Open the air compressor, wait a few mins until clean fluid comes out without bubbles, close the air compressor and turn to the next brake, until changing the brake oil for all the wheels, check the pressure of the pedal.
One man operated brake fluid replacement tool, easy and simple. You do not need to press the pedal back and forth, or need other's help, and you will not stain the floor too. Please note, you need to seal the drain screw on the bottom of the collection bottle by Teflon tape, and during the bleeding one by one, you need keep filling new fluid into reservoir to avoid it from empty and air leaks in.
This pneumatic bleeder tool is widely suitable for most vehicles, such as sedan, motorcycle, truck, SUV, etc.
Convenient pneumatic brake bleeding tool, save you from sitting there to manually pump by hand pump or press the pedal back and forth by traditional bleeding method.
It can ensure that the engine is forced to stop when the engine oil is not running or the pressure of inorganic oil is low to protect the engine from damage.
Function: It can eliminate the rattle and vibration of the hook / fairlead when sliding, protect the winch motor and gear from pulling the cable too deep or making the roller bottom, and maintain the tension on the hook to prevent the cable Loose.
Scope of application: suitable for steel roller fairleads/aluminum spline fairleads, steel cables or synthetic ropes.
Applicable models: most ATV/UTV winch off-road vehicles
This cable protector is made of nylon and has a long service life.
The four screws are solid iron screws. The surface of these screws is covered with zinc, which can effectively prevent oxidation and corrosion.
Function: It can eliminate the rattle and vibration of the hook / fairlead when sliding, protect the winch motor and gear from pulling the cable too deep or making the roller bottom, and maintain the tension on the hook to prevent the cable Loose.
Scope of application: suitable for steel roller fairleads/aluminum spline fairleads, steel cables or synthetic ropes.
Applicable models: most ATV/UTV winch off-road vehicles
This cable protector is made of nylon and has a long service life.
The four screws are solid iron screws. The surface of these screws is covered with zinc, which can effectively prevent oxidation and corrosion.
According to the operating conditions of the engine, adjust the amount of intake (exhaust), and valve opening and closing time, angle to optimize the amount of air entering and improve combustion efficiency.
Made of plastic + iron, it is not easy to be corroded and has a long aging service life.