This product is a general-purpose mobile phone rabbit cage, which can hold the mobile phone in various modes to take pictures. It can be held in one hand, two hands, hand-held, and can be installed on a tripod for horizontal and vertical shooting.
One-handed, two-handed, and hand-held (ergonomic grip) design, which fits the hand better and makes shooting more stable. It also comes with a cold shoe and a 1/4 threaded interface to facilitate external expansion.
Applicable to mobile phones with a width between 55-80MM. It can be adjusted by moving left and right, and it is not suitable to clamp the keys of the mobile phone when using it.
The power bank clip is made of aluminum alloy, which is durable and can hold a power bank between 55-82MM. It is designed for quick installation, easy to disassemble and portable, and can be taken off at any time when it is not needed.
The cage frame comes with multiple cold shoes and 1/4 threaded interfaces, which are convenient for external connection and expansion of various accessories, such as microphones, fill lights and other accessories, making the expansion more abundant.
The appearance of the side handle and the upper handle is made of aluminum alloy and wood, which is not only comfortable to hold, but also non-slip; the hidden design of the M4 hexagonal wrench is simple and convenient to store; the upper design has a cold shoe mouth and multiple 1/4 screw holes, Expansion accessories are easy to install
The metal cage is suitable for Sony ZV-E1, the real machine has no cover, the button position is not covered during use, and the flip cover and battery disassembly are not covered.
The horizontal and vertical shots can be switched freely, the stabilizer can be attached, and the built-in wrench is convenient for disassembly and assembly.
The cage design avoids the location of the camera buttons, and does not cover the buttons and battery compartment
There are many holes on the cage to connect other accessories, which can be used with an external monitor, follow focus, tripod, microphone, etc.
It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked.
Designed For Sony FX30 / FX3: The cage adopts modular design, including a top slider module and a U-shaped cage module. The top slider module is fixed by two 1/4 inch-20 screws, and can be compatible with the original XLR after disassembly; The U-shaped cage module is fixed by 1/4 inch-20 screws on both sides and the bottom, which is stable and does not deflect.
Multiple Mounting Points: The cage includes 1/4 inch-20 holes to attach magic arm; the locating hole for ARRI can attach top handle for monitor mount; the side NATO rail can attach side handle; The 1/4 inch-20 positioning holes on the upper left corner and left side can attach rod clamp for follow focus; Two 1/4 inch-20 holes on the side can attach quick release plate to prevent deflection when shooting vertically; built-in cold shoe can attach microphones, LED video lights;
Quick Release Plate for Arca: The QR plate at the bottom is compatible for DJI RS 2, RSC 2, RS 3, RS 3 Pro, quick release plate (height increase pad) and plate for Arca. Holes for shoulder straps and wrist straps are reserved on both sides and bottom to attach wrist strap, shoulder strap. The bottom QD interface is compatible with QD shoulder straps. The built-in magnetic suction wrench at the bottom is convenient for disassembly and assembly.
Ergonomic design: The position of the battery compartment is designed with an opening and closing wrench, which fits the curve of the fuselage better, solves the problem of placing the little finger and improves the grip feeling. There are built-in protective gaskets on the contact surface with the camera body to prevent the camera from being scratched.
It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked.
It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked.
Created for VLOG, designed for web celebrity live broadcast
Effectively expand and connect various auxiliary photographic equipment, let you become the protagonist of being recorded
Lightweight and portable, can support long-term handheld use
Mobile phone cage expansion, multiple cold shoe interfaces and 1/4 thread interfaces on the top, and various peripherals can be installed
Freely realize the horizontal and vertical shooting of mobile phones: The side and bottom of the cage are equipped with 1/4 screw holes, which can be connected with tripods, handles and other equipment to achieve horizontal and vertical shooting
Retractable mobile phone clip: There are elasticity and cushions in the mobile phone clamping place, which is convenient for clamping and will not scratch the mobile phone
Suitable for mobile phones with a width between 55-80mm
This product is a general-purpose mobile phone rabbit cage, which can hold the mobile phone in various modes to take pictures. It can be held in one hand, two hands, hand-held, and can be installed on a tripod for horizontal and vertical shooting.
One-hand grip, two-hand grip, and hand-held grip adopt (ergonomic grip) design, which fits the hand better and makes shooting more stable. It also comes with a cold shoe and a 1/4 threaded interface to facilitate external expansion.
Suitable for mobile phones with a width between 55-80MM. It can be adjusted by moving left and right, and it is not suitable to clamp the keys of the mobile phone when using it.
The power bank clip is made of aluminum alloy, which is durable and can hold a power bank between 55-82MM. It is designed for quick installation, easy to disassemble and portable, and can be taken off at any time when it is not needed.
The cage frame comes with multiple cold shoes and 1/4 threaded interfaces, which are convenient for external connection and expansion of various accessories, such as microphones, fill lights and other accessories, making the expansion more abundant.
The appearance of the side handle and the upper handle is made of aluminum alloy and wood, which is not only comfortable to hold, but also non-slip; the hidden design of the M4 hexagonal wrench is simple and convenient to store; the upper design has a cold shoe mouth and multiple 1/4 screw holes, Expansion accessories are easy to install
It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked.
It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked.
It is suitable for the metal cage of cameras, the real machine is unobstructed, and the button position is not blocked during use, and the flip screen and battery disassembly and assembly are not blocked.