Thermal conductive silicone pad will M.2 SSD heat transfer to the top aluminum alloy cooling module and the bottom of the aluminum alloy heat sink, and then through the cold air quickly take away the heat, reduce the temperature of the M.2 SSD to enhance the performance of the operation
Easy installation with thermal pads
Note: small 4PIN controller dedicated interface, this interface for the COOLMOON controller dedicated interface, does not support the direct insertion of the motherboard and other devices
Material: aluminum alloy, ABS, stainless steel
Interface: 5V 3-pin + small 4PIN
Only for M.2 2280 SSD hard disk (size about 22x80mm)
A integrated metal net, large open surface design, not only to ensure the tightness and dust effect of the box, but also to reduce the heat, has excellent ventilation and heat dissipation function
Double horn bass diaphragm, bass more tension, only the double horn can shock the sound
Built-in bass diaphragm, the use of enhanced magnetic full frequency speaker to achieve bass thick, full middle tone, treble clear excitation, high efficiency and low distortion can also avoid current noise interference
Independent volume control by wire
Small volume, large volume, shock bass enjoyment
Decorate your desk with stylish designs
Plug and play, independent wire control design, widely compatible with mainstream equipment, to meet various entertainment needs independent USB power supply without additional power supply equipment
This product is an adapter device for connecting an external graphics card to a notebook computer. Graphics card and power supply need to be purchased separately. (Internal screen: To use the notebooks own display, the notebook needs to have its own intel core display (Intel (R) HD Graphics) and an external Nvidia graphics card with GTS450 or above. Otherwise, an external display is required)
Due to different production batches, the color of the buttons and capacitors of the graphics card socket may be different, but it will not affect the function
The power supply of the graphics card uses 4 solid capacitors (the big 4PIN is 3 capacitors), which makes the power supply of the graphics card more stable and safe.
The adapter card has a graphics card 6PIN interface or a large 4PIN interface, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.
The slot is routed to the right to facilitate the wiring of the 2U chassis. The graphics card slot uses the original imported connector, and the connection between the graphics card and the connector is better.
The PCI-E connector adopts multi-layer shielded wire, which can be connected up to 3M without attenuating the signal.
The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.
The slot is equipped with a fixing buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall out of the slot.
This product is an adapter device for connecting an external graphics card to a notebook computer. Graphics card and power supply need to be purchased separately. (Internal screen: To use the notebooks own display, the notebook needs to have its own intel core display (Intel (R) HD Graphics) and an external Nvidia graphics card with GTS450 or above. Otherwise, an external display is required)
Due to different production batches, the color of the buttons and capacitors of the graphics card socket may be different, but it will not affect the function
The power supply of the graphics card uses 4 solid capacitors (the big 4PIN is 3 capacitors), which makes the power supply of the graphics card more stable and safe.
The adapter card has a graphics card 6PIN interface or a large 4PIN interface, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.
The slot is routed to the right to facilitate the wiring of the 2U chassis. The graphics card slot uses the original imported connector, and the connection between the graphics card and the connector is better.
The PCI-E connector adopts multi-layer shielded wire, which can be connected up to 3M without attenuating the signal.
The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.
The slot is equipped with a fixing buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall out of the slot.
This product is an adapter device for connecting an external graphics card to a notebook computer. Graphics card and power supply need to be purchased separately. (Internal screen: To use the notebooks own display, the notebook needs to have its own intel core display (Intel (R) HD Graphics) and an external Nvidia graphics card with GTS450 or above. Otherwise, an external display is required)
Due to different production batches, the color of the buttons and capacitors of the graphics card socket may be different, but it will not affect the function
The power supply of the graphics card uses 4 solid capacitors (the big 4PIN is 3 capacitors), which makes the power supply of the graphics card more stable and safe.
The adapter card has a graphics card 6PIN interface or a large 4PIN interface, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected.
The slot is routed to the right to facilitate the wiring of the 2U chassis. The graphics card slot uses the original imported connector, and the connection between the graphics card and the connector is better.
The PCI-E connector adopts multi-layer shielded wire, which can be connected up to 3M without attenuating the signal.
The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.
The slot is equipped with a fixing buckle, which is more convenient to remove and fix the graphics card, and the graphics card will not fall out of the slot.
This adapter can convert the normal M2 KEY A-E interface to M.2 nvme ssd interface.
Support 2230, 2242, 2260 and 2280 size NGFF SSD.
There are four mounting holes on the board, which are 22x30mm, 22x42mm, 22x60mm, and 22x80mm. According to the length of the slot in your machine, you can interrupt the positioning
Connect NVME M KEY SSD to M2 KEY A-E motherboard, support PCIE based NVME SSD
Easy to install, no driver required, no additional power supply required.