This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.
By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.
Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Onboard CP2102 USB TO UART converter, for serial debugging
Bring the UART control interface, for connecting host boards like Arduino/STM32
4x LED indicators, easy to check the module status
The Compute Module PoE Board is a development board that you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. With the PoE (Power over Ethernet) feature, and versatile onboard peripheral interfaces, it is suitable for evaluating the Raspberry Pi compute module, also is an ideal choice for end products.
Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
10/100M auto-negotiation Ethernet port, with PoE enabled.
4 x USB ports, which allows connecting more USB devices.
2 x CSI camera interfaces.
Onboard HDMI / DSI interfaces for connecting displays.
Onboard USB TO UART, for serial debugging.
Cooling fan interface, autorun on power-up OR controlled by IO pins.
The Compute Module PoE Board is a development board that you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. With the PoE (Power over Ethernet) feature, and versatile onboard peripheral interfaces, it is suitable for evaluating the Raspberry Pi compute module, also is an ideal choice for end products.
Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
10/100M auto-negotiation Ethernet port, with PoE enabled.
4 x USB ports, which allows connecting more USB devices.
2 x CSI camera interfaces.
Onboard HDMI / DSI interfaces for connecting displays.
Onboard USB TO UART, for serial debugging.
Cooling fan interface, autorun on power-up OR controlled by IO pins.
Based on Qualcomm platform, support 5G NSA and SA networking, support multi-mode & multi-band
Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS
Operating system support: Windows/Linux/Android
USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication
Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series
Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
Based on Qualcomm platform, support 5G NSA and SA networking, support multi-mode & multi-band
Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo, and QZSS
Operating system support: Windows/Linux/Android
USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G communication
Standard M.2 B KEY slot, compatible with different 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series
Onboard UART, PWR, and RST control pin, built-in voltage level translator, enabled via DIP switch, for use with hosts like Raspberry Pi or Arduino
Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
DC Power Jack Connector Flex Cable replacement for Dell Inspiron 15 / N5050 / N5040 / M5040 / 3520
Replace your broken or unworkable item with a new one
Each item has been checked and in good condition before shipping
Professional installation is highly recommended. We will not be responsible for any damages to your device that you may cause during the changing of replacement parts