You can use it to convert the USB 3.0 19/20 Pin header on the motherboard to 2 USB 3.0 Type A female ports.
With dual USB 3.0 ports and a 19/20 Pin port
The use of environmentally friendly materials, good electrical conductivity, strong anti-interference ability, to ensure the stability of high-speed data transmission.
Material: PCB+Plastic+Metal.
USB3.0 high speed data signal lossless transmission.
The applicable motherboard only has a USB2.0 9pin socket, no USB3.0 19pin socket, but the chassis has a USB3.0 19P patch cord connector
Motherboard USB2.0 9pin to USB3.0 19P patch cord connector.
Plug the adapter into the USB2.0 9pin socket of the motherboard, and then plug the 19P cable on the front of the chassis into the 19pin socket of the connector.
What you have to note is that only the USB2.0 transmission rate is available.
Made of plastic, which is durable and light, very convenient for you, and you can also use it for a long time.
The adapter is designed for changing ATX 8PIN cable installation direction.
You can install the 8PIN power cable from vertical to horizontal direction with this adapter.
This will solve the PSU installation for the limited height chassis.
Here are two types of graphics card power steering adaptors, PH38A and PH38B. The former clips on top(up angled) and the latter clips on the bottom(down angled).
Product role: for motherboard 8Pin corner steering
Motherboard socket snap inward, outward route, suitable for positive curved A type
Motherboard socket snap facing outward, outward alignment, suitable for anti-bending B type (most of the market motherboard design)
Note: please note that the distinction between the motherboard CPU 8Pin and graphics card PCI-E 8Pin is different, this model only applies to the motherboard CPU 8Pin
External hard disk cable Mini sas HD SFF 8643 to 4 SFF 8639 with 15P power supply
The product meets the signal bandwidth requirements of 6Gb/s to 12Gb/s or the corresponding SAS 2.1 and proposed SAS 3.0 industry standard signal specifications.
The system also offers greater linear board port density (port-to-port linear port density of only 19.01 mm) than previous SAS interconnect systems (port-to-port linear port density of only 19.01 mm)
Mini-SAS HD products fully comply with SFF-8643 (internal application) and SFF-8644 (external application) industry specifications.