Consumer Electronics

View as Grid List

Sort by

Display per page

ANENG Iron-aluminum Dual-purpose Coating Thickness Measuring Instrument (CG01)

Number of calibration points: 4 calibration points for linear smoothing calculation
Data group storage: 6 groups x 100 groups
Display rotation angle: 0 degrees, 90 degrees, 180 degrees, 270 degrees/off
Unit conversion: um/mil
Upper and lower limit range: 0~1500um (0~59.0mil) freely set/close
Backlight brightness: 10 levels adjustable/close
Power battery: 2 AAA batteries (not included)
Iron base type: magnetic metal iron base (FE) / non-magnetic metal non-ferrous base (NFE) / automatic identification

$74.97 $90.71

Wintact WT2110 Color Screen Display Coating Thickness Gauge

Menu operation and color screen high-definition display.
It can quickly, non-destructively and accurately measure the thickness of the non-magnetic coating on the magnetic metal substrate and the thickness of the non-metal coating on the non-magnetic metal substrate. At the same time, it can automatically identify the magnetic metal substrate and the non-magnetic metal substrate.
Two measurement methods: single measurement and continuous measurement.
Three calibration modes: basic calibration, offset calibration, and zero calibration. Metric/English units and storage function.
Screen rotation, charging protection, multi-interface display, screen brightness selection.
Widely used in manufacturing, metal processing, chemical, commodity inspection and other testing fields.
Support USB and battery power supply.
Measuring range: 0-1500um/0-1.5mm/0-59mil

$69.25 $81.71

Wintact WT2100 Color Screen Display Coating Thickness Gauge

Quickly measure the thickness of paint coating, with a wider measuring range: 0-1800um/0-70.9mil/0-1.8mm, menu operation.
Measurement of the thickness of the non-magnetic coating on the surface of the magnetic metal substrate. The symbol of the magnetic substrate is Fe.
Automatic power-off measurement, metric/imperial um/mil/mm unit can be switched.
Two measurement methods: single measurement and continuous measurement. Three calibration modes: basic, offset, and zero calibration.
With charging protection, multi-interface display and screen brightness selection.
360-degree screen rotation can easily read data, and the V-shaped groove on the probe can be used for small cylindrical parts.
Large color high-definition LCD display, which can store 15 data and bright backlight, make it easy for you to read the results clearly.
Portable streamlined design, special hand-held non-slip treatment, light weight, small size, suitable for the palm of the hand.

$74.50 $93.12

Wintact WT200 Film Coating Thickness Gauge

Measure thickness of surface coatings on metal substrates
Single/continuous/differential measurement available
Zero-point/2-point/basic calibration available
Metric and imperial units of measurement optional
Powered by 2 x 1.5V AAA batteries (not included)
LCD backlight
Auto power off
Measuring range: 0 - 1.80mm (0 - 71.0 mil)

$14.44 $17.33

BENETECH GT235 Iron-aluminum Dual-purpose Paint Film Coating Thickness Gauge

Measuring the thickness of non-magnetic coating on the magnetic metal substrate.
Measuring the thickness of the non-metallic coating on the non-magnetic metal substrate.
Automatically identifying the non-magnetic metal substrate and magnetic metal substrate.
Single measurement, continuous measurement and differential measurement available.
Zero-point calibration, Offset Calibration and basic calibration available.
Metric and imperial units of measurement optional.
LCD backlight.
Automatic shutdown.

$40.67 $46.77

BENETECH GM130 Ultrasonic Thickness Meter Tester Gauge, Measure Range: 1.00~300.0mm

This unit is an intelligent handheld product, which adopts ultrasonic measuring principle, and is controlled by microprocessor, provides quick and precise measurement of thickness for most of industrial material. This unit is widely used in various precise measurement for different hardware / parts in industrial realm; one of its important application is to monitor the level of thickness-decreasing during operation of various and pressure container. Diffusely applied in manufacture fields, metal processing, and commercial inspection.
Scope of application: This unit is suitable for measuring materials that are good ultrasonic conductor such as metal, plastic, acrylic, glass etc., as long as the measured part in two parallel surfaces for measurement of thickness. This unit is not suitable for cast iron due to its big crystalloid composition.
Features and functions:
Auto calibration to assure the accuracy
Sound velocity measurement: with a given thickness to measure the sound velocity to improve accuracy
12 sound velocities for different material
Coupling status indication
Preset 12 thickness measurement data store and recall

$115.84 $144.80

BENETECH GT2100 Digital Anemometer Coating Thickness Gauge Color Screen Car Paint Thickness Tester Meter

Feature:
The color screen display and a variety of backlight colors, can be clearly read.
2 measuring methods: single measurement & continuous measurement, 3 calibration modes: basic setting, offset, zero calibration.
1500 data storage, 100 independent arrays, each group can store 15 data for easy reviewing and data analysis at any time.
Fully automatic foura??way rotating screen can be easily read in any position, convenient and practical.
It is a portable thickness tester with high resolution display. It is a good helper for detecting seconda??hand cars to identify accidental car.
Material: ABS
Measuring range: 0-1800um/0-70.9mil

$72.88 $83.81

Digital Display Outer Diameter Micrometer 0.001mm High Precision Electronic Spiral Micrometer Thickness Gauge, Model:50-75mm

Material: High-quality steel
Process: ABS engineering plastics
Calibration process: laser calibration
Resolution: 0.001mm
Packaging: New plastic packaging
Size: 16x6cm
High-definition LED screen, digital display is clearer
Precise measurement, efficient and stable

$66.42 $80.37

Digital Display Outer Diameter Micrometer 0.001mm High Precision Electronic Spiral Micrometer Thickness Gauge, Model:25-50mm

Material: High-quality steel
Process: ABS engineering plastics
Calibration process: laser calibration
Resolution: 0.001mm
Packaging: New plastic packaging
Size: 16x6cm
High-definition LED screen, digital display is clearer
Precise measurement, efficient and stable

$58.92 $72.47

Digital Display Outer Diameter Micrometer 0.001mm High Precision Electronic Spiral Micrometer Thickness Gauge, Model:75-100mm

Material: High-quality steel
Process: ABS engineering plastics
Calibration process: laser calibration
Resolution: 0.001mm
Packaging: New plastic packaging
Size: 16x6cm
High-definition LED screen, digital display is clearer
Precise measurement, efficient and stable

$72.24 $83.08

SNDWAY High-precision Car Paint Finish Coating Thickness Gauge Paint Measuring Instrument SW6310B Upgrade Edition

Measuring range: 0-1700um
Display mode: Digital display
Weight: 0.25 (kg)
2.0 inches large screen segment
Swivel display screen for different views of user during process measurement.
Simple operation, connect directly to the coating and on the screen shows the property and thickness.
Provide Zero and Multi-point calibration, calibration Reliably and quickly.
Measured energy saving given up to 30 sets, power-off will not be obliterated given.

$114.85 $142.41

SNDWAY High-precision Car Paint Finish Coating Thickness Gauge Paint Measuring Instrument SW6310A Standard Edition

Measuring range: 0-1700um
Display mode: Digital display
Weight: 0.25 (kg)
2.0 inches large screen segment
Swivel display screen for different views of user during process measurement.
Simple operation, connect directly to the coating and on the screen shows the property and thickness.
Provide Zero and Multi-point calibration, calibration Reliably and quickly.
Measured energy saving given up to 30 sets, power-off will not be obliterated given.

$105.78 $127.99