Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller
How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up.
Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided.
Chips that can be copied: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers) , 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the microcontroller
How to clear the code: Press and hold the unlock and lock buttons at the same time (some shells have the up and down buttons), the LED indicator flashes three times, release any of the pressed buttons, the other is not loose, click to release Press the button three times, the LED indicator will enter a fast flashing state, and all the data in the memory will be cleared. After the data is cleared, the remote control, no matter which button is pressed, the LED indicator will not light up.
Duplicating method: hold the original remote control in one hand, and the duplicating remote control in the other, and place the two remote controls as close as possible. For the keys that need to be copied, the LED indicator flashes quickly three times and then flashes quickly. The copying is successful. The operation methods of other keys are the same. Some remote controls have low transmission power, so the original remote control and the duplicating remote control should be operated back to back for duplicating. If there is interference in some operating environments, the interference operation should be avoided.
Using the receiver, place the TV anywhere within 50 meters of the source. Simply connect the transmitter to a set-top box, game console or other HDMI output device, then connect the receiver to any HD display
HDMI, VGA, 3.5mm jacks can be freely matched and output simultaneously or separately. The transmitted signal is very clear and can easily transmit uncompressed high-definition video and audio. Signal experiences ultra-low latency (real-time) even when streaming 3D video to 1080p devices
A true plug-and-play experience up and running within 20 seconds. Connect the transmitter to the HDMI source, then the receiver to the secondary HDTV and youre ready to go. Runs on standard 802.11 5GHz
8 transmitters can be connected to 1 receiver at the same time, one-key switching, no mutual interference, multi-screen sharing. *Note: This operation requires additional purchase of transmitters, 1 receiver can support 8 transmitters (Note: The transmitter cannot be used alone, it must be used in conjunction with the receiver)
The resolution can reach 4K, the picture is delicate, and various details can be restored more clearly. Easily send crystal clear uncompressed HD video and digital audio
This wireless receiver can be easily connected and does not take up a lot of space, ideal for crowded conference room setups and can be easily shared between different laptops and computers
The receiver adopts HDMI+VGA dual port, using WiFi transmission technology, through the point-to-point connection between the transmitter and receiver equipment, the image/video console and set-top box of MAC, notebook, PC, mobile phone, game and set-top box can be connected with HDTV, Projector or monitor synchronization
This USB3.0 to HDMI HD converter, allows you to connect the desktop and laptop USB interface to high-definition display device.
So you can watch full HD video or slideshows on the big screen with HDMI input ports such as HDTVs, projectors, slideshows, and more to hear even more rocking music.
Output resolution up to 1080p.
USB input: Support USB2.0 / USB3.0
The maximum transmission rate: 5.0Gbps
Output DDC number: 5Volts P-P (TTL)
USB3.0 cable length: 150mm, using standard USB3.0 cable