Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Electronics
Raspberry Pi CM4 To 3B Adapter for Raspberry Pi 3 Model B/B+
- Onboard standard CM4 connector, support access to CM4 Lite / eMMc series boards with Quad Core Cortex A72 64-bit processor, more powerful performance
- Easily compatible with the interfaces of Raspberry Pi 3B / 3B+ boards
- Onboard headphone jack (extended from USB)
- Onboard 4-ch USB ports, compatible with USB 2.0 / 1.1 transmission
- Onboard RJ45 Gigabit Ethernet port, 10 / 100 / 1000 M adaptive
- Onboard PoE header, for connecting PoE HATs
$29.93 $36.51
Waveshare Arduino Compatible Base Board for Raspberry Pi CM4
- CM4 socket: Suitable for all variants of Compute Module 4
- Connector:
- M.2 M KEY slot for connecting communication module or NVME SSD
- Arduino compatible GPIO header
- USB: USB 2.0 Type A connector x 1
- Camera: MIPI CSI-2 port x 1 (15pin 1.0mm FPC connector)
- Video: HDMI port x 1, supports 4K 30fps output
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
$25.72 $32.15
Waveshare IMX378-190 Fisheye Lens 12.3MP Wider Field Camera for Raspberry Pi
- Sensor: IMX378
- CMOS size:1/2.3 inch
- Camera type: Color Pixels: 12.3MP (4056 x 3040)
- Shutter: Rolling Shutter
- Aperture: F2.4
- Distortion: Less than 58%
- Field of vies: 190 degree
- Focal length: 6.5mm
$53.45 $62.54
Waveshare OV5640 FF 5MP USB Camera Module, Support 1080P Video Recording
- Pixels: 5MP
- Sensor: OV5640
- Interface: USB 2.0
- Camera: Sensor size 1/4 inch
- Aperture (F): 2.8
- Focal length (EFL): 3.29 mm
- Field of view (FOV): 68 degree
- Distortion: Less than 1%
$32.45 $38.62
Waveshare OV5640 AF 5MP USB Camera Module, Support 1080P Video Recording
- Pixels: 5MP
- Sensor: OV5640
- Interface: USB 2.0
- Camera: Sensor size 1/4 inch
- Aperture (F): 2.8
- Focal length (EFL): 3.29 mm
- Field of view (FOV): 68 degree
- Distortion: Less than 1%
$32.45 $40.24
Waveshare 2.8 inch Touch Screen Expansion Fully Laminated Display For Raspberry Pi CM4
- Touch screen expansion board + interface expander: The touch screen expansion board and an additional interface expander, with Gigabit Ethernet port, M.2 slot for connecting communication module or SSD, and more USB ports.
- 2.8 inch display with 5-point capacitive touch control, better touch experience from the fully laminated screen, together with 6H toughened glass panel, more safe to use
- Touch Screen Expansion Board Introduction:
- CM4 socket: Suitable for all variants of Compute Module 4
- USB: USB 2.0 x 1
- Connector: MIPI CSI 22PIN 0.5mm camera connector
- Display: 2.8 inch fully laminated screen, 480 x 640 pixels, 5-point capacitive touch, toughened glass panel
- Video: Micro HDMI x 1, supports 4K 30fps output
$66.66 $78.66
Waveshare Core1262-868M Anti-Interference SX1262 LoRa Module, EU868 Band
- The Core1262-868M is a LoRa core module which incorporates new-generation SX1262 chip. It has featuress including mini size, long range transmission, high anti-interference capability, and so on. The module uses EU868 band, combined with LoRa gateway, it can be connected to servers like TTN server to build LoRa network.
- New-generation SX1262, higher power efficiency and longer transmission distance than the traditional SX1278
- EU868 band, combined with LoRa gateway, quick connection to cloud servers like TTN server
- Comes with rich development resources and manual (examples for STM32, Raspberry Pi Pico)
- RF chip: SX1262
- Frequency range: EU868 (863~870MHz)
- Modulation: LoRa/(G)FSK
- Data rate: 0.018~62.5Kbps (LoRa), 0.6~300Kbps ((G)FSK)
$13.11 $16.26
Waveshare RP2040-Zero Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader mini Version
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of on-board Flash memory
- USB-C connector, keeps it up to date, easier to use
- Castellated module allows soldering direct to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
$9.79 $11.55
Waveshare RP2040-LCD-0.96 Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader
- RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi RP2040 microcontroller chip, as same as on Raspberry Pi Pico. For software development, either Raspberry Pi C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.
- In additional, there are also onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high efficiency DC-DC buck-boost chip.
- Key features include:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of on-board Flash memory
- USB-C connector, keeps it up to date, easier to use
- 0.96 inch 160x80 pixels 65K colorful IPS LCD display
$16.47 $19.27
Waveshare RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040, without Pinheader
- Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now.
- As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.
- What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.
- Key features include:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 4MB of on-board Flash memory
- USB-C connector, keeps it up to date, easier to use
$11.28 $13.87
Waveshare RP2040-Plus Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader
- Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All these problems are solved by our RP2040-Plus now.
- As same as Raspberry Pi Pico, it incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins.
- What is different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip.
- Key features include:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 4MB of on-board Flash memory
- USB-C connector, keeps it up to date, easier to use
$13.44 $15.99
Waveshare 27076 Industrial USB TO TTL UART Serial Communication Module Converter (USB TO 8CH TTL)
- Support USB expansion 8-way TTL (UART) with hardware flow control, can communicate simultaneously and independently
- Onboard self-recovery fuse and protection diode can ensure stable output of current and voltage, prevent overcurrent and overvoltage, and improve impact resistance
- Onboard TVS protection circuit can effectively suppress surge voltage and transient spike voltage in the circuit, lightning protection and anti-static
- Onboard level conversion circuit, surge protection, anti-static, stable and safe communication
- Onboard TTL serial port 3.3V and 5V level conversion circuit, can switch TTL communication level
- Aluminum alloy shell, oxidized frosted treatment, CNC numerical control opening, firm and durable, exquisite workmanship
- External 4 LED indicators, convenient for checking power supply and signal receiving and sending status
- Host interface: USB
$40.40 $49.29
NEED HELP?
Payment options
