Search
WORLDWIDE SHIPPING
fast, flexible, secure options
ONLINE SUPPORT 24 / 7
anytime, anywhere help
MONEY BACK GUARANTEE
shop with confidence
WIDE SELECTION
every day low prices
Electronics
For Honor Pad X8/X6/7 Butterfly Bracket Kids EVA Shockproof Tablet Case (Blue)
- Kids-Friendly Material: Made of safe and harmless ultra-light food-grade EVA foam material, in case baby to munch on the tablet,can withstand considerable wear and tear, and provide excellent shock and drop protection. Easy to clean, durable, practically unbreakableSuper lightweight is very suitable for children Boy Girl.
- Safe-tested: This EVA rugged case can protection against child rough throws and falls on the floor and against the walls from unforgivable heights. The foam creates enough of a lip all the way around to protect the screen too,which is a must in baby family.
- Convenient Handle and Kickstand: The top handle was very easy for Kids small hands to grip securely and comfortably. With kickstand for the kiddo can prop up the tablet while watching a video, pre-K learning or playing an educational games. There is a slot in the tablet for the stylus, which should reduce the possibility of it being lost.
- Full Protection: Raised screen bezel edges, thick foam fully covers the back, sides and extends above the surface of the tablet screen, which means that the screen will remain safe from scratches if laid on its face
- Designed For Kids: Cute and beautiful butterfly design, open the wings to become a stand,Your baby will squealed with delight when they saw it.Considering if you have kids who are tablet users which can prolong the device by having a protective case.
$11.34 $13.95
Waveshare 2.4GHz ESP32-C3 Mini Development Board, Based ESP32-C3FN4 Single-core Processor with Header
- Low-power SoC equipped with RISC-V 32-bit single-core processor, clocked at up to 160MHz
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
- 400KB SRAM and 384KB ROM, and 4MB onboard flash memory
- Castle-shaped module and on-board ceramic antenna, allowing direct soldering to the carrier board
- Support flexible clock and module power independent settings and other controls to achieve low power consumption in different scenarios
- Integrated USB serial port full-speed controller, 15GPIO pins, pin functions can be flexibly configured
- 3SPI, 1I2C, 2UART, 1I2S, 2ADC, etc.
- Product size: 23.5 x 18mm
$10.73 $13.31
Waveshare 2.4GHz ESP32-C3 Mini Development Board, Based ESP32-C3FN4 Single-core Processor without Header
- Low-power SoC equipped with RISC-V 32-bit single-core processor, clocked at up to 160MHz
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
- 400KB SRAM and 384KB ROM, and 4MB onboard flash memory
- Castle-shaped module and on-board ceramic antenna, allowing direct soldering to the carrier board
- Support flexible clock and module power independent settings and other controls to achieve low power consumption in different scenarios
- Integrated USB serial port full-speed controller, 15GPIO pins, pin functions can be flexibly configured
- 3SPI, 1I2C, 2UART, 1I2S, 2ADC, etc.
- Product size: 23.5 x 18mm
$10.48 $12.89
For AirTag Shockproof Anti-scratch Leather Protective Case Cover with Hang Loop Key Chain (Purple)
- Made of comfortable leather, non-toxic and tasteless
- A variety of colors, you can choose according to your preferences
- All-inclusive design, full protection of the tracker
- Comes with a hanging loop, which can be safely fixed
- Easy to install, protect and anti-scratch, can fix the equipment
$6.45 $7.87
SOYTO P2961 Wireless Sports Bluetooth Headset Universal Noise Reduction Mobile Gaming Headset (Gray)
- Bluetooth pairing name: P2961
- Battery capacity: 300mAh
- Charging time: about 2h
- Bluetooth: V5.1
- Transmission distance: within 10m
- Talking time: about 6h
- Music playback time: about 10h (70% volume)
- Impedance: 32 ohms
$10.32 $12.07
Waveshare 25567 For Raspberry Pi UPS HAT (D), Pogo Pins Connector , Without Battery
- Adopt pogo pin connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
- Onboard lithium battery charging chip, with dynamic path management, more stable power supply
- Onboard boost converter chip provides stable 5V power output
- I2C bus communication, real-time monitoring of battery voltage, current, power, and remaining power
- Multiple battery protection circuits: overcharge/discharge protection, overcurrent protection, short circuit protection, safer and more stable
- Onboard MCU management, supports detecting power connection and starting Raspberry Pi
- Supports displaying battery power on the system to facilitate checking the remaining battery power.
- Onboard LED indicator for monitoring battery working status
$29.66 $34.70
SOYTO SY-T1 Wireless Headset Bluetooth Gaming Headset With Plug Play Microphone (Pink)
- Battery capacity: 300mAh
- Working time: about 15-20h
- Charging time: about 2h
- Bluetooth: 5.3
- Charging port: Type-C
- Operating voltage: DC 5V
- Operating frequency: 20-20KHZ
- Speaker size: 40mm
$12.34 $14.81
SOYTO SY-T1 Wireless Headset Bluetooth Gaming Headset With Plug Play Microphone (Black)
- Battery capacity: 300mAh
- Working time: about 15-20h
- Charging time: about 2h
- Bluetooth: 5.3
- Charging port: Type-C
- Operating voltage: DC 5V
- Operating frequency: 20-20KHZ
- Speaker size: 40mm
$12.34 $14.68
SOYTO SY-T1 Wireless Headset Bluetooth Gaming Headset With Plug Play Microphone (White)
- Battery capacity: 300mAh
- Working time: about 15-20h
- Charging time: about 2h
- Bluetooth: 5.3
- Charging port: Type-C
- Operating voltage: DC 5V
- Operating frequency: 20-20KHZ
- Speaker size: 40mm
$12.34 $15.30
For Airtag Silicone Case Magnet Tracker Protective Case (Black)
- Drop-proof, drop-proof and dust-proof, comprehensive protection
- Magnetic design, can be adsorbed on the iron surface, easy to install
- Silicone material, soft and wear-resistant
- Material: silicone
- Technology: injection molding
- Size: about 4.5 x 3 x 0.8cm
- Weight: about 10.5g
- Note: only the protective case, the location tracker and other items in the picture are not included
$5.89 $7.36
For AirPods Pro 2 Electroplated Leather Texture Wireless Earphones Protective Case (Navy Blue)
- Material: TPU electroplating process
- Comprehensive Protection: Protect your headphones from dust, scratches and external impacts.
- Convenient charging: Keep the charging port, you can charge the earphones without taking off the protective cover, and use all functions easily.
- Personalized design, fashionable and beautiful.
- Equipped with a lanyard: allows you to carry the headphones safely and conveniently anytime and anywhere.
- Product does not include headphones.
$6.03 $6.93
For Samsung Galaxy A22 5G Calf Texture Card Slot Ring Holder Phone Case (Blue)
- Durable: PU+TPU material, wear-resistant and durable. With good performance and high quality, it can be used for a long time.
- Practical card slot function: 1 card slot design can store your credit card or small banknotes that you need daily.
- Convenience: Precise openings allow access to all keys and ports without removing the case.
- Anti-fall: TPU all-covered design at four corners, anti-shock and anti-fall, no fear of bumps.
- Protection: Adequately protect the device from normal scratches, dirt, tears and wear and tear.
- Stand: The 360-degree rotating ring stand allows you to free your hands when making hands-free video calls, reading or watching movies.
- Note: The actual product is subject to the title model, and the picture model is for reference only.
$7.56 $9.22
NEED HELP?
Payment options
