Made of aviation aluminum material, lightweight design, only 45g
Equipped with a special silicone lens protective case, the large internal space is designed to avoid the lens and lens protective mirror. The lens protective case does not rub with the lens during the disassembly and assembly process, effectively preventing sand and gravel from scratching the lens (lens cover is optional)
Folding magnetic bayonet, easy to use
There is soft foam on the top and bottom of the rabbit cage. After the camera is installed, it can be firmly fixed.
Use rubber rings to enhance screw damping. The screws will not loosen while riding motorcycles and bicycles, and there is no need to worry about the camera falling off the frame.
Dual cold shoe interface and 1/4 interface, rich expansion, can be connected to fill light, microphone and selfie stick
The battery slot has a complete opening. You can directly replace the battery and remove and insert the MicroSD card without dismantling the rabbit cage, which is convenient and fast.
PVC balance bar design, to prevent water injection, heavy pressure pull bad handles
Black PVC material, solar energy automatic heat absorption
Extra large water injection port, add water through the water injection port (note that not all full)
With hook lanyard, easy to hang the water bag in a high place, the water pipe will naturally hang down, the water will naturally flow out
Showerhead, smooth water discharge, about 24 outlets
Heating method: the colored side facing the sun, let the sun fully irradiated heating for a few hours or so, when the water temperature reaches a suitable state, can be used
Wide compatibility: The top of the magnetic base has a 1/4-inch standard interface, which can be used with the Go3 standard steering bracket and adapter accessories with a 1/4-inch screw. Can mount action cameras, mobile phones and other equipment. This product can be used with the original Pocket 3 1/4-inch threaded handle or battery handle.
Dual possibilities, unlocking more camera positions. The set includes two bases, a magnetic suction cup and a suction cup, which can be used in different scenarios to unlock more new camera positions. (Suction cup base optional)
Multi-scenario adsorption, one-stop use: It can be adsorbed on iron-containing metal surfaces, and the operation is convenient and efficient. (Such as: car body, metal railings, door frames, refrigerator doors)
Strong magnetic suction: six strong neodymium magnets, strong suction
Bottom silicone cushion: The bottom is wrapped with soft glue to avoid scratching the surface of the adsorbed object.
Parameter:
Main materials: the magnetic base is aluminum alloy, nylon fiber reinforced, the suction cup base is PVC PC
Size: Magnetic base 66.6 x 22.8mm, Suction cup base 85 x 50mm
Used to fix action cameras to backpacks, belts, belts, car fenders, etc. With the rotatable J-shaped buckle, it can be rotated in any 360-degree direction (the rotatable J-shaped buckle is optional)
Closed sewing is used to firmly fix the base and the main body together, so that the shooting will not be affected by shaking.
Double anti-slip design: T-shaped silicone anti-slip particles and PU anti-slip leather double anti-slip, more effectively prevent slipping
High-quality hook and loop fastener, high toughness, strong adhesion, convenient and practical
Suitable for a variety of sports cameras: suitable for GOPRO/DJI OSMO/XIAOYi/Mijia/ SJCAM and other sports cameras (with an AEE adapter, it can also be used with mobile phones)
Material: flexible diving material/PP/PU
Packing list:
Set A: Backpack fixing bracket + double-ended J-shaped buckle + long screws
Used to fix action cameras to backpacks, belts, belts, car fenders, etc. With the rotatable J-shaped buckle, it can be rotated in any 360-degree direction (the rotatable J-shaped buckle is optional)
Closed sewing is used to firmly fix the base and the main body together, so that the shooting will not be affected by shaking.
Double anti-slip design: T-shaped silicone anti-slip particles and PU anti-slip leather double anti-slip, more effectively prevent slipping
High-quality hook and loop fastener, high toughness, strong adhesion, convenient and practical
Suitable for a variety of sports cameras: suitable for GOPRO/DJI OSMO/XIAOYi/Mijia/ SJCAM and other sports cameras (with an AEE adapter, it can also be used with mobile phones)
Material: flexible diving material/PP/PU
Packing list:
Set A: Backpack fixing bracket + double-ended J-shaped buckle + long screws
After connecting the traditional sports camera accessories, it is firmly attached to the main camera through the magnetic buckle structure, ensuring stability and safety even in strenuous sports scenes.
Compatible with most traditional action camera accessories
Applicable models: Suitable for DJI OSMO Action 4/3/2 cameras
After connecting the traditional sports camera accessories, it is firmly attached to the main camera through the magnetic buckle structure, ensuring stability and safety even in strenuous sports scenes.
Compatible with most traditional action camera accessories
Applicable models: Suitable for DJI OSMO Action 4/3/2 cameras
Double-sided multi-layer coating, reducing the light reflection between the lenses, clear imaging, better picture quality
The frame has a built-in rubber ring, effectively isolate the water droplets and water vapor, allowing you to create underwater, in the rain, humidity, low temperature and other environments without worries
Adopt the same fixing method with the original lens, use the matching wrench to unscrew the original protective lens, then screw to install filter, waterproof, anti-fog, drop-proof performance can be guaranteed to the greatest extent
1.5mm thick glass lens, cuts, falls, collision, high water pressure are fearless
Does not block the host lens field of view, shooting screen transparent without dark corners
The main role of the ND filter is to reduce the amount of light into the lens, so that the screen to reduce overexposure, lengthening the exposure time of the camera
CPL mirror can eliminate reflections on the surface of the object, so that the object in the bright environment to restore the original clarity, texture and color saturation