Specially designed for DJI Pocket 3 camera, precise mold opening, small size but large capacity, can perfectly store all-round kit, such as: Pocket 3 camera (with protective case) + tripod + battery handle + threaded handle + microphone, etc., website The bag design can store data cables, windproof fur covers, SD cards and other small accessories;
High-quality PU leather fabric with Lycra and short velvet inside to fully protect the Pocket 3 camera from bumps and scratches;
Two-way zipper, smooth and non-stuck;
Lightweight, wear-resistant, easy to carry, and can also be stored directly in a backpack;
Portable carrying handle design, and the shoulder strap can be worn diagonally, making it easy and safe to carry the Pocket 3 camera all-in-one suit, which is very suitable for travel or home storage.
Suitable for drones, remote control cars, outdoor sports, etc. It is only 1.5 inches in size and weighs 11g.
Quick and non-destructive installation design, three fixing devices: glue, silicone ring, and Hook and Loop Fastener, can be freely attached to any suitable object such as drones, remote control cars, bicycles, motorcycles, helmets, etc.
Use 6 high-brightness LED lamp beads and select high-transparency and high-brightness shell materials, including 4 white light lamp beads, 1 red and 1 green lamp bead; It has a variety of different modes, single color always on, single color slow Flash (flash once every 1000ms, the same frequency as civil aviation), single-color fast flash (flash once every 500ms), two-color cycle, and three-color breathing cycle modes to meet your lighting preferences.
With memory function, the lighting mode before shutting down will be retained after shutting down.
Complying with FAA federal regulations, it provides 360-degree visibility and visibility of more than 3 miles for drones, making it easy to identify the direction and direction of drones. This is an essential small strobe light that helps improve the warning and visibility of objects. Identification helps prevent collisions and accidents.
It has a low battery reminder function. After shutting down, the green light flashes to indicate that the battery power is lower than 3.6V. Built-in rechargeable battery, rechargeable and reusable, the charging time is about 90 minutes, and the use time after full charge is about 4 hours (flash mode).
The illuminated tripod is specially designed for DJI Mini 4 Pro drone. It fits the curved surface of the Mini 4 Pro body very well and has a hollow carving design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes. It can help you better observe your surroundings when you are flying or taking off or landing in the dark night.
Yellow, green and blue mixed color lights, 3 flashing modes, fast flashing mode, slow flashing mode and constant light mode.
The luminous tripod can increase the distance between the bottom of the Mini 4 Pro and the ground by 20 mm. When the Mini 4 Pro is used at night or on overgrown or bumpy gravel roads, it can reduce the impact and make it easier for no one to use it. The drone lands smoothly, preventing ground debris or water stains from soiling or damaging the drone body, gimbal, sensors and propellers, providing safe landing protection.
Built-in battery, rechargeable and reusable, the charging time is about 30 minutes, and the use time after full charge is about 60 minutes.
Lightweight design. The light-emitting tripod weighs only 18.5 grams and can stably carry the fuselage. The lightweight design will not add extra burden to the Mini 4 Pro flight and will not shake or fall off during flight. It also adopts a foldable and quick-release design that will not damage the drone body, is easy to install, and improves portability.
Specially designed for small drones with cameras, suitable for DJI Mavic Pro/ Platinum / Mavic Air / Mavic 2 Pro/Zoom, DJI Air 2S, DJI Avata, DJI Mini 2/SE/MINI 3 Pro, Mavic Air 2. DJI Spark/Tello, Xiaomi FIMI drone, GoPro Karma, Parrot Anafi drone, etc.
The unfolded size is 50cm/65cm and can be folded for easy portability.
Made of waterproof PU leather material with anti-fouling function, making the landing pad easy to clean.
High-precision printing, outdoor ink, waterproof and sun-proof, not easy to fade, double-sided and two-color design, suitable for a variety of environments, highlighting the take-off and landing positions
Specially designed for small drones with cameras, suitable for DJI Mavic Pro/ Platinum / Mavic Air / Mavic 2 Pro/Zoom, DJI Air 2S, DJI Avata, DJI Mini 2/SE/MINI 3 Pro, Mavic Air 2. DJI Spark/Tello, Xiaomi FIMI drone, GoPro Karma, Parrot Anafi drone, etc.
The unfolded size is 50cm/65cm and can be folded for easy portability.
Made of waterproof PU leather material with anti-fouling function, making the landing pad easy to clean.
High-precision printing, outdoor ink, waterproof and sun-proof, not easy to fade, double-sided and two-color design, suitable for a variety of environments, highlighting the take-off and landing positions