308duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
406duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
Please do not use a power supply lower than 1500W, otherwise it will easily burn the charger or power supply
4010 is suitable for power supply above 2000W and voltage between 42-48V
If you must use a low-power power supply (outfield battery pack), please set the power of the charger to limit the use within the power of the power supply (outfield battery pack), and do not use it at full power. For specific settings, refer to the manual.
Please note that before connecting the charger, it is best to power on the power supply first, and then power on the charger after the power supply voltage is stable, so as to avoid the damage to the charger due to the unstable peak voltage of the instantaneous voltage of the power supply of poor quality.
The output wire and input wire in the charger are standard without plugs. You need to go back and weld the required battery head and power head by yourself.
308duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
406duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
Please do not use a power supply lower than 1500W, otherwise it will easily burn the charger or power supply
4010 is suitable for power supply above 2000W and voltage between 42-48V
If you must use a low-power power supply (outfield battery pack), please set the power of the charger to limit the use within the power of the power supply (outfield battery pack), and do not use it at full power. For specific settings, refer to the manual.
Please note that before connecting the charger, it is best to power on the power supply first, and then power on the charger after the power supply voltage is stable, so as to avoid the damage to the charger due to the unstable peak voltage of the instantaneous voltage of the power supply of poor quality.
The output wire and input wire in the charger are standard without plugs. You need to go back and weld the required battery head and power head by yourself.
308duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
406duo is suitable for power supply above 1500W and voltage between 24-30V (charger input current is limited)
Please do not use a power supply lower than 1500W, otherwise it will easily burn the charger or power supply
4010 is suitable for power supply above 2000W and voltage between 42-48V
If you must use a low-power power supply (outfield battery pack), please set the power of the charger to limit the use within the power of the power supply (outfield battery pack), and do not use it at full power. For specific settings, refer to the manual.
Please note that before connecting the charger, it is best to power on the power supply first, and then power on the charger after the power supply voltage is stable, so as to avoid the damage to the charger due to the unstable peak voltage of the instantaneous voltage of the power supply of poor quality.
The output wire and input wire in the charger are standard without plugs. You need to go back and weld the required battery head and power head by yourself.