Use guide, removal of the timing chain will require the removal of the sump, ensure the engine is at TDC No 1 cylinder, ensure the chain tensioner is fully retracted and held in the retracted position using a suitable pin, and remove the crankshaft pulley using an appropriate pulley holding tool
Specially designed to fit the long petrol injectors used on the models equipped with the 5.0lt V8 petrol engines.
The angled slide hammer shafts gives improved access when working on the rear most injectors.
Angled and flexible injector clamp system.
OEM 310-197.
Fits for Jaguar X150, XK Series, X250 (XF) and XJ models (V8 5.0lt petrol engines) / Land Rover Discovery 4, Range Rover, Range Rover Sport (V8 5.0lt petrol engines).
Clutch retaining tool used to lock the clutch basket for VAG models with DSG 02E 6 speed transmissions.
This tool is used to assist in the removal and fitting of the multi-plate clutch stack when working on the DSG 02E 6 speed transmissions used across the VAG ranges
Application: VAG DSG 02E 6 Speed vehicles
Fits for Volkswagen Golf, Touran / Audi A3 2004- /Audi TT 1999-
Fuel injector install tool compatible with BMW N20, and new N55 engine.
BM number: 130320, note: this injector not fit old N55 engine
Specially designed to install and remove the injector for N20 N55 engine.
Tips: you much evenly install the tool first before installing or removing the injectors. The tool may not come fully tighten, so you much first make sure you tighten everything first before you ue the tool.
Made of steel, high hardness, stable and strong, not easy broken.
It is the best electrical tester for reducing diagnostic time in automotive electrical systems.
Its long cable makes your testing easily.
After a simple hook-up of the unit to the battery of vehicle, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward.
It has short-circuit protection and can test for bad ground contacts instantly.
Storage battery testers are used for activated style leadacid storage battery
Precise circuit and strong digital processing unit make it complete collection of a series of complicated data and figure out every test data, which availably by 4-wire Kelvin test connection.
Besides it strengthens input protection inside , in order to prevent such situations as polar reversal connection, over-high voltage input, poor contact of the test clamps and so on. That makes sure safer and more convenient when testing.
This tester is the best tool for battery sales, vehicle repair and condition check of all kinds of lead-acid batteries that used in equipment system associated with lead-acid battery.
It is possible to disable AdxBlue system by installing an AdxBlue emulator (programmable device) into the vehicle. You can switch it on/off anytime.
EURO6 AdBlue Emulators Disable system: AdxBlue system (Fully) / AdxBlue NOX sensor / DPF system / DPF temperature sensors / DPF regeneration.
After installing Euro6 Emulator, you can remove: DPF sensors / NOx sensor (only in DAF dona??t remove first NOx sensor) / Adblue temp. sensor / Adblue pump / Adblue level sensor / Adblue ECU.
Emulator Man Euro 6 does not need to be learned. You install emulator under the metal cover of AdBlue Pump on the right side behind the cab, and disconnect plug from AdBlue Pump and connect emulator.